Cleaning of Hydraulic Valve Parts of Hydraulic Press Machine

      Dongguan Shengshi Weiye Machinery Technology Co., Ltd. specializes in the production of Forging Press, Deep Drawing Hydraulic Press, Gravity Casting Machine, Four-column Servo Press, C Type Pneumatic Press and other machines. Friends in need are welcome to pay attention and learn more.

   Now, as usual, manufacturers pay more attention to the cleaning of the valve body, and the cleaning of the slide valve and other parts is not very good. However, in actual production, the cleanliness of the slide valve is not up to standard, which leads to a decline in the quality of the slide valve. The equipment qualification rate is high, and the two-beam and four-column hydraulic press is reliable. Symptoms of hyposexuality also occur from time to time. As for the cleaning of parts, there are many types and a lot of work. Cleaning of parts includes cleaning of burrs and dirt, and chromium-plated parts also includes cleaning of residual chromic acid in the inner holes. The parts of the two-beam and four-column hydraulic press can be cleaned with ultrasonic waves and then rinsed with air and water.The finish of the bore before cleaning is relatively tight and usable. Use drill bits, reamers and brushes of the same diameter to remove dust from the inner holes, and the small holes should be cleaned one by one. The cleaning structure and methods of parts are similar to those of the valve body, but they should be flushed with high-pressure and small-flow gas-water hydration. There is no need to use diesel fuel or water solutions with rust inhibitors for high-pressure cleaning. The subsidy processing of hydraulic valves is a huge systematic project. It involves a very common category. It not only needs to provide configuration-specific protection, but also needs to practice, summarize and improve skills. It must also be handled and managed carefully. Only in this way can we subsidize the processing of hydraulic valves.