Key Points of Daily Maintenance and Care for Small Slide - Type Hydraulic Presses

Small slide - type hydraulic presses play an important role in industrial production. To ensure their efficient and stable operation and extend their service life, daily maintenance and care are of great significance. Mastering the key points can effectively reduce equipment failure rates and improve production efficiency.

The maintenance of mechanical components is the foundation. Regularly check the slide guide rails to ensure that their surfaces are clean and free of debris. Once impurities adhere to the guide rails, wear will be aggravated, affecting the smoothness and accuracy of slide movement. You can use a clean soft cloth to wipe the guide rails and apply an appropriate amount of lubricating oil to form a protective film and reduce friction. For the transmission chain, check whether its tension is appropriate. If it is too loose, it is easy to skip teeth, and if it is too tight, it will increase the wear of the chain and sprocket. At the same time, clean the oil stains and dirt on the chain and replenish special chain oil to ensure smooth power transmission.

The hydraulic system is the core of the hydraulic press and requires key maintenance. Regularly check the oil level and quality of the hydraulic oil. If the oil level is too low, the oil pump is likely to inhale air, resulting in unstable system operation; if the oil quality deteriorates, it will affect the normal operation of hydraulic components. Replace the hydraulic oil according to the specified cycle and clean or replace the hydraulic oil filter at the same time to prevent impurities from entering the system. In addition, check whether there is any leakage in the hydraulic pipeline. If oil seepage is found, tighten the joints or replace the seals in time to avoid insufficient pressure caused by hydraulic oil leakage and affect the equipment performance.

The maintenance of electrical components cannot be ignored. Keep the inside of the control cabinet clean and prevent dust accumulation to avoid short - circuit faults. Regularly check whether the wiring terminals are loose to ensure reliable circuit connections. For the motor, monitor its operating temperature and sound. If the temperature is too high or there is abnormal noise, it may mean that there is a fault in the motor and it needs to be checked and dealt with in a timely manner. At the same time, check whether the cooling fan of the motor is running normally to ensure good heat dissipation of the motor.

The daily maintenance and care of small slide - type hydraulic presses cover multiple aspects such as machinery, hydraulics, and electricity. Only by strictly implementing according to the key points can the equipment be kept in the best condition at all times and provide a solid guarantee for production.