Analysis of the reasons why the oil temperature of the hydraulic press is too high

During the use of hydraulic equipment, once pressure loss, mechanical loss, etc. occur, it is very easy to cause the oil temperature of the equipment to rise sharply in a short period of time, thereby affecting the stability of the mechanical movement of the equipment, and even causing damage to the hydraulic components, which is not conducive to the safe operation of the system.

 

1. Reasons for excessive temperature

 

Lubrication system failure: Insufficient lubricating oil or improper injection will lead to poor lubrication, which will increase the friction coefficient of the hydraulic press and generate high temperature.

 

Excessive load: Excessive load will reduce the working efficiency of the hydraulic press, generate a lot of heat energy, and cause the machine to overheat.

 

High-speed operation: The hydraulic press needs to consume more energy and generate higher temperatures when running at high speed.

 

Environmental factors: The high ambient temperature of the hydraulic press will cause the machine to generate higher temperatures.

 

2. Solutions to excessively high temperatures of the hydraulic press

 

Check the lubrication system: Check whether the lubricating oil is sufficient, maintain the lubrication system, and ensure effective lubrication.

 

Reduce the load: Reasonably distribute the load of the hydraulic press and reduce the operating load of the machine.

 

Reduce high-speed operation time: reduce unnecessary high-speed operation time of the hydraulic press and take a proper rest.

Machine heat dissipation: take corresponding heat dissipation measures for the reasons of excessive machine temperature, such as adding a radiator, installing a fan, etc.

 

Replace lubricating oil: replace the lubricating oil regularly to ensure its good quality.

 

In short, excessive temperature of the hydraulic press may cause damage to the machine, so corresponding preventive measures need to be taken. Regularly check the lubrication system, reduce the load, appropriately reduce the high-speed operation time, increase machine heat dissipation, replace the lubricating oil and other measures can effectively reduce the risk of excessive machine temperature.

 

  Dongguan Shengshi Weiye Machinery Technology Co., Ltd. specializes in the production of Forging Press, Deep Drawing Hydraulic Press, Gravity Casting Machine, Four-column Servo Press, C Type Pneumatic Press and other machines. Friends in need are welcome to pay attention and learn more.