Precautions for gravity casting machine

      The Gravity Casting Machine is an indispensable machine in the gravity casting process. The temperature of the heated molten metal used in the production of the gravity Casting Machine is usually as high as hundreds or even thousands of degrees. There are many places that need to be paid attention to when pouring. The operator cannot be careless, otherwise the results will be disastrous. Imagine.

　　Workers should carefully check whether the mechanical installation is flexible, stable and reliable before pouring. When lifting the pouring ladle filled with molten metal, be careful of the pouring and splashing of the molten metal. When the pouring ladle is filled with molten metal, do not fill it too full or exceed the limit. 80% of the volume to avoid spillage and harm to the operator.

 

　　If a serious "fire" occurs during pouring, the pouring should be stopped immediately to prevent burns and fires caused by molten metal splashing. In the actual gravity casting production process, every link must be strictly controlled. Once a mistake occurs in any link, the quality of the casting will be damaged or even directly scrapped. Therefore, it is also necessary to understand what needs to be paid attention to when producing gravity casting machines.

 

　　As we all know, the requirements for gravity casting are very strict, and there are certain safety risks during the use of gravity casting machines, so everyone will be very careful when using gravity casting machines. But do you know? Even if the gravity casting machine is not used, the following should be paid attention to when cleaning the gravity casting machine.

 

　　Workers cleaning gravity casting machines must take personal protection and be familiar with various safety operating procedures. When taking castings from the casting pile, take them from top to bottom to prevent the castings from collapsing and injuring people. A crane should be used for serious turning of castings. When using a gravity casting machine, avoid slings or casting hand presses, and do not overload lifting. , Do not hang the sling on the pouring and riser of the casting.

 

　　When using the air shovel, please note that the air shovel should be placed next to the casting before starting it. Do not start it first and then take it to the casting. When using it, do not shovel towards people to avoid flying chips and hurting people. When out of service, close the valve on the air duct and stop the air supply to the air shovel. When cleaning the sand, avoid the remaining adhering sand and the flash, burrs on the casting, cuts on the hands caused by the pouring riser, and the damage to the eyes by flying sand.

 

      Dongguan Shengshi Weiye Machinery Technology Co., Ltd. specializes in the production of Gravity Casting Machine,Low Pressure Casting Machine,Liquid Die Forging Machine and other machines. Friends in need are welcome to pay attention and learn more.