What are the common causes of oil leakage in Hydraulic Press Machine?

March 11, 2025

The operation of 20T Hydraulic Press Machine generally requires the help of lubricating oil, so if there is oil leakage during the operation of Hydraulic Press Machine, lubricating oil should be added.

Deep Drawing Hydraulic Press is mainly suitable for the stretching, forming, pressing and other processes of metal products. It can also process non-metallic materials, press powder metallurgy products, calibrate shaft parts, press sleeve parts, and shape and trim metal products.

Hydraulic Stamping Press is mainly composed of a frame, a hydraulic system, a cooling system, a pressurized oil cylinder, an upper die, and a lower die. The pressurized oil cylinder is installed at the upper end of the frame and connected to the upper die. The cooling system is connected to the upper die and the lower die. Its characteristics are that the lower end of the frame is equipped with a mobile workbench and a mobile oil cylinder connected to the mobile workbench, and the lower die is placed on the mobile workbench. Hydraulic Press Machine manufacturers use the static pressure of the oil pump to transport hydraulic oil to process metal, plastic, rubber, wood, powder and other products. When the Hydraulic Stamping Press leaks oil, don't panic. Carefully analyze why this happens and you should be able to find the cause and repair it quickly.

Regarding the 20T Hydraulic Press Machine, let's analyze and solve it below. At the same time, development is also knowledge that everyone must master, and there are two main points. However, there is no need to summarize the specific research here, and everyone will understand it after reading the article. I just hope that through these, everyone's learning ability can be improved, and if possible, the purpose of the learning activities expected by the company will not be achieved.

Highlight 1: Hydraulic Press Machine, compared with ordinary Four-column Servo Press technology, what does the latter have?

Hydraulic Press Machine can display the current press fit position, interference, size judgment, and press-in curve in real time, which are not available in ordinary hydraulic presses.

The development of these two problems is the most likely situation for our Hydraulic Press Machine to leak oil, which must not be ignored during maintenance.

Aspect 2: What are the main reasons for Hydraulic Press Machine oil leakage?

The specific answers to the social issues we raised are:

1. Are there scratches or foreign matter on the surface of the parts?

2. Is there any unreasonable design, and is the sealing performance good?

3. Oil circuit problems, check the filter frequently and replace it regularly.

Author:

Mr. dgsswy

E-mail:

dgliheng168@163.com

Phone/WhatsApp:

13509684273